Page History
Page info | ||||
---|---|---|---|---|
|
Tip | ||||||
---|---|---|---|---|---|---|
| ||||||
|
Panel | ||||
---|---|---|---|---|
| ||||
|
This guide explains how to use caBIG® Annotation and Image Markup (AIM) on the ClearCanvas Workstation 3.0.3. The information presented explains key procedures for creating and working with AIM annotation objects. The intended audience for this guide is a biomedical researcher familiar with the AIM information model.
...
Panel | ||||
---|---|---|---|---|
Topics in this guide include:
|
...
title | To Print the Guide |
---|
...
Multiexcerpt include nopanel true MultiExcerptName ExitDisclaimer PageWithExcerpt wikicontent:Exit Disclaimer to Include
Setting AIM Data Service Options
The purpose of AIM on the ClearCanvas workstation is to connect to multiple AIM Data Services that can accommodate the AIM 3.0 information model. As a result, these data services are collectively known as the AIM 3.0 Data ServicesService.
While by default the workstation is not configured to connect to any AIM 3.0 Data Services, it can use the AIM 3.0 Data Service. An end user can enter any valid URL for the AIM Data Service and click the Save button to have that URL remain on the workstation for future sessions.
Click to configure the AIM Data Service. You can access the data service configuration from the explorer toolbar, shown in Figure 1, or through an opened study's toolbar, shown in Figure 2.
Figure 1. Access AIM Data Service Options from Explorer Toolbar
Figure 2. Access AIM Data Service Options from an Opened Study
Setting AIM Options
To access the AIM settings, on the ClearCanvas menu, select Tools > Options > AIM. When finished, click Apply to commit the changes. This is demonstrated in Figure 3.
Figure 3. AIM Options
Info | ||
---|---|---|
| ||
By default, the setting for sending AIM XML documents to the AIM 3.0 Data Service is disabled. You must enable this option in order to have new AIM XML documents sent to the AIM Data Service. If you have neither set the AIM Data Service destination nor enabled the Send New Annotations to caGrid option, your existing AIM XML documents will not be sent to the AIM 3.0 Data Service. |
...
Option | Description |
---|---|
Send New Annotations to caGrid | If selected, the workstation will send new annotations to the assigned caGrid location. Also see #Setting Setting AIM Data Service Options. |
Store New Annotations Locally | If selected, the workstation will store a copy of new annotations in the AIM XML format on the local computer. A user can assign where the AIM annotation documents can be stored on the local computer. |
Required User Information | If selected, user credentials need to be entered before creating an AIM annotation document. |
Require Graphic Markup in Annotation | If selected, a user must create at least one graphical drawing on an image before creating an AIM annotation document. |
Templates Folder | If entered, the directory will be used to search for AIM template XML documents. |
Table 1. AIM Options Setting
Setting Toolbar Options
The ClearCanvas workstation allows a user to change the size of icons and show all icons on one screen. To do so, select Tools > Options > Toolbar. The recommended icon size is medium and you should select the Wrap long toolbars option. See Figure 4.
Figure 4. Setting Toolbar Option
Using AIM Tools
Table 2 describes four AIM tools that are available on the ClearCanvas workstation.
Tool | Description |
---|---|
AIM Template displays a template based form with a set of questions and choice(s) of answers for each question. A user is able to can import a new AIM template at to that location. New Create new annotation objects can be created by completely filling out this form and clicking the Create Annotation button. | |
AIM Object Locator depicts available AIM objects in the currently displayed study without searching through every image in the study or series. | |
AIM Details provides the ability to view specific areas of a selected graphic markup for an existing annotation. | |
Closed Polygon Markup tool allows creation of a free hand graphical markup. This tool can be used in addition to existing ClearCanvas tools in creating graphical markup. |
Table 2. Available AIM Tools
AIM Template
To activate the AIM template tool in Figure 5, click the AIM template tool button (#1). If you put the pin down (#2), you can detach the AIM Template tab by putting the mouse pointer at the header (#3) and dragging it out, as illustrated in Figure 5-16.
Figure 5. Activate AIM Template
Figure 5-16. Detached AIM Template Tool
Info | ||
---|---|---|
| ||
When an AIM annotation is created, the following conditions are applied (based on AIM default settings described in #Setting Setting AIM Options)
|
Importing a New AIM Template
An Import an AIM template XML document can be imported by clicking the AIM Template button, as shown in Figure 67. Windows Explorer opens a predefined folder described in the Setting AIM Options section.
Figure 67. Importing an AIM Template
User Information
Author information as depicted in (Figure 78) can be changed. To use this feature, click the User Info button to activate the AIM User Information form. Enter appropriate information and click Save.
Info | ||
---|---|---|
| ||
The user information will be saved on the workstation for future use. If you are sharing the workstation with another reader, you must change or at least verify that the information in the "User Info" section reflects your personal credentials. |
The AIM Template Manager is a tool used to create an AIM template XML document.
Figure 78. AIM User Information
Detailed Description of a Question
A detailed description of a question can be seen by placing the mouse pointer over the first three characters of each feature name, as shown in Figure 89.
Figure 89. Detail Description of a Question
AIM Locator
The AIM locator, depicted in (Fig 9Figure 10), allows users to see existing AIM instances available in a study. A list of available AIM instances is displayed below the Available AIM Annotations section, which is #2 in the following image. To access this feature and see an AIM annotation, click Show Study, which is #3 in the following image.
Figure 910. AIM Locator
AIM Annotation Details
The AIM annotation details, as illustrated by Figure 1011, allow a user to examine detailed information captured in an AIM instance. To access this feature, you select an image containing an AIM instance and then click the AIM Details button, as shown in (#1). The AIM Annotation Details panel appears. This panel contains information tabs including Anatomic Entity, Imaging Observation, Calculations, and All Details. The All Details tab (shown in #3) allows a user to see information related to both Anatomic Entity and Imaging Observation and their characteristics.
Figure 1011. AIM Details
AIM Display Markups from Different Users
For a given image in an imaging study that has more than one reader interpreting and creating AIM annotations, the workstation can display every annotation while allowing you to turn off markups from a selected group of readers. Figure 11 12 depicts an image with three markups from three readers. The markup from reader named qwe-3 was turned off.
A right-mouse click on the image activates a pop-up menu with a " Visible AIM Users " option to turn readers' markups on or off.
Figure 1112. AIM Markup Display
By default, the workstation also displays annotations created by different users in different colors. Selecting Tools > Options > AIM > Markup allows you to You can change which colors are used for which user's AIM annotations ( Figure 12). Selected by . To assign a color to a user, go to Tools > Options > AIM > Markup.
By default, the " Random " checkbox (#2) is selected, which assigns a random color to each user. If you do not select that option, you can override the random color with a different color. You can also override the color used to depict one or more users' AIM annotations. Change the default color by clicking the button to the left of the checkbox. A user's color may be changed by clicking the color next to their name and selecting a new color in the dialog that appears. Users not yet loaded into the list may be added to the list by clicking 's markup drawings. By clearing the Random checkbox, a default color is used instead. Colors may be assigned to a single user's markup drawings by selecting the color next to the user's name in the list.
Click the Add Login button (#3) to add a new user to the list.
Selected users may be removed from the list (resetting their colors to the default) by selecting by clicking the Remove Selected button (#4). All . Users removed from the list will have their annotations reset to the default color.
Select all users in the list may be selected by clicking the Select All button (#5). Selected users may have their color reset to the default color, either random or predefined as determined by the Random checkbox (#2), by clicking Click the Reset To Default Color button (#6) to reset the color assigned to selected users to the default color.
Figure 1213. AIM Markup Display
Viewing AIM Data for Each Image Series
You can see AIM annotations for an imaging study grouped by image series in the Available AIM Annotations section. Figure 14 shows two different image series. The first, Axial FSE, includes one AIM instance. The second, Axial T1, includes three AIM instances.
Figure 14. AIM Data in Each Image Series
Using Data Services
National Biomedical Imaging Archive (NBIA) Data Service
The NBIA Data Service (Figure 1315) tab provides the ability to connect and retrieve studies from NBIA directly within the workstation. Holding the Ctrl key allows you to click on and select multiple studies. Right-clicking activates a feature that allows you to retrieve selected studies.
Figure 1315. NBIA Data Service
Users can enter search parameters (Figure 1416) based on a single value or multiple values of Patient ID, Patient's Name, Sex, Birth Date, Project name at NCI, Slice Thickness, Study Instance UID, and Modality.
Figure 1416. Search NBIA Data Service
Columns in the NBIA Data Service page can be selected or deselected to display or hide an available result. Fig Figure 15 depicts that all available columns for the service have been selected.
Figure 1517. Select NBIA Data Service Display Columns
AIM Data Service
The AIM Data Service tab (Figure 1618) provides the ability to connect and retrieve AIM XML documents from an AIM 3.0 Data Service (see #Setting Setting AIM Data Service Options). It also allows a user to retrieve both AIM documents and studies from NCI's NBIA. Right-clicking activates a feature that allows you to retrieve studies.
Figure 1618. AIM Data Service
You can enter search parameters (Fig 17Figure 19) based on a single value or multiple values of Anatomic Entities, Anatomic Entity Characteristics, the user who created the AIM XML documents, Imaging Observation, Imaging Observation Characteristics, and Study Instance UID.
Info | |||
---|---|---|---|
| |||
A type of AIM XML document, Imaging Annotation, or Annotation Of Annotation, must be selected. The default value is Imaging Annotation.
Figure 1719. Search AIM Data Service
Columns in the AIM Data Service page can be selected or deselected to display or hide an available result. Figure 18 20 depicts that all available columns for the service have been selected.
Figure 1820. Select AIM Data Service Display Columns
Additional Information
Follow the links below for more information on how to set up AIM, information on the AIM Template Manager, and AIM Template Manager software.
- AIM Terms and Concepts
- AIM Template Manager User's Guide
- AIM Template Software Setup manual
- AIM Template Creator Software