 |
Page History
...
| Panel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| |||||||||
|
| Tip | ||
|---|---|---|
| ||
Depending on the version you use, the screen layouts may be slightly different, however, the basic design and the steps are similar. |
...
The screen shown in Fig 2.3 opens. Check for the "Experiment has been successfully saved" message. Click the "Contacts" tab. Fill the form with your information. You can also edit the contact information from the screen shown in Fig 2.4.
!800px-Fig2.3.png|alt="screenshot representing the step"
!800px-Fig2.4.png|alt="screenshot representing the step"
Step 2.4
Click the "Data" tab. Then Click the "Upload New File(s)" button, see Fig 2.5. A new popup window, "Experiment Data Upload" window opens, see Fig 2.6.
!800px
- Fig2. 5.png|alt="screenshot representing the step" - 5
!Fig2.6.png|alt="screenshot representing the step"
- 6
Step 2.5
Browse to the location where the sample experiment Data file (caArray_golub-00095_files.zip) was saved and click on the "Upload" button, see Fig 2.6.*
Step 2.6
Wait until the window "Your file upload is complete" is displayed. Click "OK" (Fig 2.7). Then click the "Close Window and go to Experiment Data" button as shown in Fig 2.7.
!Fig2.7.png|alt="screenshot representing the step" 
- 7
Step 2.7
On the main window shown below (Fig2.8), make sure the column "STATUS" displays the word "Uploaded" for each file. Select the check boxes for all experiment data sets and then click on "Import" button. A new window "Import Options" opens (Fig2.9). Select the first option "Autocreate annotation sets...", then click on the "Import" button.
!630px-Fig2.8.png|alt="screenshot representing the step" 
- 8
Step 2.8
Depending on the speed of the machine and the size of the data, it may take a few minutes for the sample data to be imported. Check the status of the import by Clicking on the "Refresh Status" button (Fig2.10). The initial status will be shown as "In queue" (Fig2.10). When the import is complete, no data will be displayed under the "Manage Data" tab (Fig2.11). Click on the "Imported Data" tab to view imported data file (Fig2.12). If you completed all these steps, Congratulations! You have just successfully created an experiment and deposited your microarray experiment data into the caArray.
...
