 |
Page History
...
| Panel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| |||||||||
|
| Tip | ||
|---|---|---|
| ||
Depending on the version you use, the screen layouts may be slightly different, however, the basic design and the steps are similar. |
*Before Log into logging in to the caArray application, please download the sample array design file Image_Hu6800.zip, and the sample experiment data file Image_caArray_golub-00095_files.zip, if you have not already done so. You may unzip the design file to get Hu6800.cdf, but do not extract the sample data file caArray_golub-00095_files.zip.
...
Log into the caArray Application. Click on the "MANAGE ARRAY DESIGNS" button under "CURATION" on the right side of the page. A new window, "Manage Array Designs", opens. Before uploading the design file, check if your application already has a copy of the design file by the same name. If yes, skip the design file upload and proceed to #Step 2. You can use this design file for your experiment. If not, follow Step 1.2 to upload a new design file.
- 1
- 1b
Steps 1.2
On "Manage Array Designs" page, Click the "Import a New Array Design" button, see Fig.1.1. Another page "New Array Design (Step 1)" opens, see Fig. 1.3. Fill out the "New Array Design" form with the information shown in Fig.1.3. Then click on "Next".*
<gallery widths=450px heights=150px perrow=2 ">
Image
Fig1.2.png| Fig. 1.2 Click on the picture to enlarge
Image:Fig1.3.png| Fig. 1.3 Click on the picture to enlarge
</gallery>
...
- 2
- 3
Step 1.3
...
The page "New Array Design(Step 2)"
...
opens. Click the "Browse" button
...
. Browse to the location where the sample array design file (Hu6800.cdf) was unzipped. Then click "Save". See Fig 1.4 and Fig 1.5.
...
- 4
! - 5
Step 1.4
...
On clicking the "Save" button, the screen shown in Fig 1.6
...
opens. Click
...
"Close window and go to Manage Array Designs".
...
The "Manage Array Designs"
...
re-opens, as shown in Fig 1.1b (c). (Please note that for large array design files, the importing process might take a while. An array design can only be used when it is fully imported.)
<gallery widths=450px heights=150px perrow=2 ">
Image
Fig1.6.png| Fig. 1.6 Click on the picture to enlarge
Image:Fig1.1c.png| Fig. 1.1b Click on the picture to enlarge
</gallery>
- Â
<font size="4" ><div align="Left">*Step 2
...
