 |
Page History
| Scrollbar | ||
|---|---|---|
|
| Page info | ||||
|---|---|---|---|---|
|
| Composition Setup |
|---|
cloak.toggle.type = text
cloak.toggle.open=[show]
cloak.toggle.close=[hide]
|
| Panel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| |||||||||
|
| Tip | ||
|---|---|---|
|
<?xml version="1.0" encoding="utf-8"?>
<html>
| Table of Contents | ||||||||
|---|---|---|---|---|---|---|---|---|
|
...
|
...
| |
Depending on the version you use, the screen layouts may be slightly different, however, the basic design and the steps are similar. |
*Before Log into the caArray application, please download the sample array design file *Hu6800.zip*, and the sample experiment data file caArray_golub-00095_files.zip, if you have not already done so. You may unzip the design file to get Hu6800.cdf, but do not extract the sample data file caArray_golub-00095_files.zip.'''
...
Step 1: Design File Upload
...
...
Step 1.1.
...
Log into the caArray Application. Click on the "MANAGE ARRAY DESIGNS" button under "CURATION" on the right side of the page
...
.
...
A new window, "Manage Array Designs"
...
,
...
opens.
...
Before uploading the design file, check if your application already has a copy of the
...
design file by the same name. If yes, skip the design file upload
...
and proceed to #Step 2. You can use this design file for your experiment. If not, follow Step 1.2 to upload a new design file.
...
!800px-Fig1.1a.png|
...
alt="screenshot representing the step" - 1
!800px-Fig1.1c.png|
...
alt="screenshot of the Manage Array Designs page" - 1b
On "Manage Array Designs" page, Click
...
the "Import a New Array Design" button, see Fig.1.1. Another page "New Array Design (Step 1)"
...
opens, see Fig. 1.3. Fill out the "New Array Design" form with the information shown in Fig.1.3. Then click on "Next".*
<gallery widths=450px heights=150px perrow=2 ">
Image
Fig1.2.png| Fig. 1.2 Click on the picture to enlarge
Image:Fig1.3.png| Fig. 1.3 Click on the picture to enlarge
</gallery>
-
;<font size="3">Step 1.3.</font> The page "New Array Design(Step 2)" will appear. Click the "Browse" button, browse to the location where the sample array design file (Hu6800.cdf) was unzipped. Then click "Save". See Fig 1.4 and Fig 1.5.
<gallery widths=450px heights=150px perrow=2">
Image
Fig1.4.png| Fig. 1.4 Click on the picture to enlarge
Image:Fig1.5.png| Fig. 1.5 Click on the picture to enlarge
</gallery> -
;<font size="3">Step 1.4.</font> On clicking the "Save" button, the screen shown in Fig 1.6 will apear. Click on "Close window and go to Manage Array Designs". You will be brought back to "Manage Array Designs" screen, as shown in Fig 1.1b. (Please note that for large array design files, the importing process might take a while. An array design can only be used when it is fully imported.)
<gallery widths=450px heights=150px perrow=2 ">
Image
Fig1.6.png| Fig. 1.6 Click on the picture to enlarge
Image:Fig1.1c.png| Fig. 1.1b Click on the picture to enlarge
...
