On the pane that appears select, Compute > Virtual Machine > Quick Create.
DNS Name: pick something unique and memorable
Image: Ubuntu Server 13.04
New Password/Confirm: provide a good password for the azureuser
Region/Affinity Group: West US
Click Create a virtual machine.
Once your virtual machine is created, select it from the VM screen.
Go to the Endpoints menu.
(+ Add) an Endpoint at the bottom of the screen.
Provide the following information
Name: HTTP
Public Port: 80
Private Port: 8000
Restart the VM from the management console.
Troubleshooting note: You may get a message that Endpoint was successfully created but restart failed. In this case, go back to Dashboard (Management Console) and click Restart. In some cases, multiple attempts may be required.
At this point, it appears that a restart is not mandatory to continue with configuration.
Now you can login to it and start configuring things.
Things to do once you're in Ubuntu.
Install Python 2.7. For current Debian-based Linux distributions (such as Ubuntu), BSD and Mac Python 2.7 is usually installed. However Redhat-based Linux distributions, such as RHEL and CentOS, are sometimes behind the curve and do not have Python 2.7. As of this writing, CentOS 6.4 is at Python 2.6, which is well on its way to EOL. Python 2.6 may work, but code will be written with 2.7 and 3.3+ in mind. Below are instructions for Ubuntu Linux 13.04+.
sudo apt-get install python2.7 python2.7-dev python-virtualenv
Install PIP.
sudo apt-get install python-pip
Install virtualenv.
sudo apt-get install python-virtualenv
Install Git.
sudo apt-get install git
Install the prerequisites for MySQL-Python.
sudo apt-get install build-essential python-dev libmysqlclient-dev
In order to test uploading and running bundles in CodaLab, you will need to have a Windows Azure storage account. Once you have set up your Azure account, log on to the Azure Portal and follow the steps in this section.
Install azure-cli.
In Ubuntu it can be installed using the following command:
sudo apt-get install nodejs-legacy
sudo apt-get install npm
sudo npm install -g azure-cli
To login run the following command:
azure login
Copy the code offered to you, above, and open a browser to http://aka.ms/devicelogin. Enter the code, and then you are prompted to enter the username and password for the identity you want to use. When that process completes, the command shell completes the log in process.
From command line azure sb namespace create <name> <location>
where <location>
can be "East US"
Make sure you have the dependencies (Python 2.7 and virtualenv). If you're running Ubuntu:
sudo apt-get install python2.7 python2.7-dev python-virtualenv
Clone the CodaLab repository:
git clone https://github.com/codalab/codalab-cli
cd codalab-cli
Run the setup script (will install things into a Python virtual environment):
./setup.sh
Set your path to include CodaLab (add this line to your .bashrc
):
export PATH=$PATH:<path to codalab-cli>/codalab/bin
Optional: include some handy macros (add this line to your .bashrc
):
. <path to codalab-cli>/rc
Fork the CodaLab repo from GitHub.
Clone your fork.
git clone https://github.com/<username>/codalab.git
For more details and recommended practices, see Developer Guidelines.
In this segment, you will run the dev_setup script. This will install all dependencies and create a new virtual environment (venv) for CodaLab.
Run the dev_setup script.
Windows
cd codalab
.\dev_setup.bat
If you are going to use SQL Server as a database, you will need to install the Python PyODBC library. Before running dev_setup
, you can download the installer, then run the setup script as follows (assuming the installer was downloaded at the root of a D drive):
cd codalab
dev_setup.bat D:\pyodbc-3.0.7.win-amd64-py2.7.exe
Linux
cd codalab
source ./dev_setup.sh
Activate the virtual environment.
Windows
venv\Scripts\activate
Linux
source venv/bin/activate
Now you are ready to install the application schema and default data into the database.
You can configure CodaLab to use either SQL Server or MySQL. Both of these require you to explicitly create a database.
Follow these steps to install MySQL Python.
Windows
Navigate to the virtual environment (venv) for CodaLab and use the following command to install MySql-Python.
easy_install mysql-python
Launch the MySQL Command Line Client.
Use the following command to create a new database:
create database if not exists MySQL_DevDB;
Linux
Run the following command to install MySQL:
sudo apt-get install mysql-server
Login to MySQL as root by typing the following command:
mysql -u root -p
Enter your root password when prompted.
Use the following command to create a new database:
create database if not exists MySQL_DevDB;
Type exit
to return to the terminal prompt.
Mac
Open a terminal window.
Login to MySQL as root by typing the following command:
mysql -u root -p
Enter your root password when prompted.
Use the following command to create a new database:
create database if not exists MySQL_DevDB;
Type exit
to return to the terminal prompt.
Finish up installation for Django
export DYLD_LIBRARY_PATH=/usr/local/mysql/lib:$DYLD_LIBRARY_PATH
local.py
). If there is no local.py
, save a copy of local_sample.py
named local.py
in the same directory.In the Azure storage
section, enter your Azure account details:
DEFAULT_FILE_STORAGE = 'codalab.azure_storage.AzureStorage'
AZURE_ACCOUNT_NAME = "<enter name>"
AZURE_ACCOUNT_KEY = '<enter key>'
AZURE_CONTAINER = '<enter container name>'
PRIVATE_FILE_STORAGE = 'codalab.azure_storage.AzureStorage'
PRIVATE_AZURE_ACCOUNT_NAME = "<enter name>"
PRIVATE_AZURE_ACCOUNT_KEY = "<enter key>"
PRIVATE_AZURE_CONTAINER = "<enter container name>"
BUNDLE_AZURE_CONTAINER = "<enter the name of your bundle container>"
BUNDLE_AZURE_ACCOUNT_NAME = PRIVATE_AZURE_ACCOUNT_NAME
BUNDLE_AZURE_ACCOUNT_KEY = PRIVATE_AZURE_ACCOUNT_KEY
In the Service Bus
section, enter your service bus connection information:
SBS_NAMESPACE = '<enter the name of your service bus>'
SBS_ISSUER = 'owner'
SBS_ACCOUNT_KEY = '<enter value for 'default key'>'
Important: Do not change the values for DEFAULT_FILE_STORAGE
and PRIVATE_FILE_STORAGE
, as these parameters contain the name of the Python class which implements the Azure storage back-end for Django.
In the DATABASES
section, enter the configuration settings for the database you want to use.
SQL Server*
DATABASES = {
'default': {
'ENGINE': 'sql_server.pyodbc',
'NAME': 'somename',
# Leaver user and password blank to use integrated security
'USER': '',
'PASSWORD': '',
'HOST': '(localdb)\\v11.0',
'PORT': '',
'OPTIONS': {
'driver': 'SQL Server Native Client 11.0',
}
}
MySQL
DATABASES = {
'default': {
'ENGINE': 'django.db.backends.mysql',
'NAME': 'MySQL_DevDB',
'USER': 'someuser',
'PASSWORD': 'somepassword',
'HOST': 'someserver', # Empty for localhost through domain sockets or '127.0.0.1' for localhost through TCP.
'PORT': '', # Set to empty string for default.
}
Note: If you want to use MySQL you'll need to manually install it and create a database before proceeding. CodaLab setup does not install MySQL.
codalab/codalab/codalabtools/compute/sample.config
.sample.config
named .codalabconfig
in the same directory..codalabconfig
.In the compute-worker
section, enter the configuration settings for the storage account and the compute queue.
compute-worker:
azure-storage:
account-name: "your account name"
account-key: "your account key"
azure-service-bus:
namespace: "your namespace"
key: "your secret key"
issuer: "owner"
listen-to: "name of queue"
local-root: "D:\\Temp"
In order to work with competitions and bundles in your local development environment, you will need to manually enable Cross-origin resource sharing (CORS). CORS is a mechanism that allows many resources on a web page to be requested from another domain outside the domain the resource originated from. Web Browsers commonly apply same origin restriction policy to network requests. CORS relaxes these restrictions allowing domains to give each other permissions for accessing each other's resources. CORS is supported for Blob, Table and Queue services and can be enabled for each service using Azure SDK for python.
Make sure you have a valid management certificate to connect to the Service Management endpoint. This tutorial explains how to create a certificate and upload it to the Azure management portal: http://azure.microsoft.com/en-us/documentation/articles/cloud-services-python-how-to-use-service-management/.
Open codalab/codalabtools/compute/enableCORS.py
in a text editor, and update account_name
and account_key
with the account name and key for your blob storage account:
import sys
import yaml
from os.path import dirname, abspath
# Add codalabtools to the module search path
sys.path.append(dirname(dirname(abspath(__file__))))
from codalabtools.azure_extensions import (Cors,CorsRule,set_storage_service_cors_properties)
account_name = "<your blob storage account name>"
account_key = "<your blob storage account key>"
cors_rule = CorsRule()
cors_rule.allowed_origins = '*' # this is fine for dev setup
cors_rule.allowed_methods = 'PUT'
cors_rule.exposed_headers = '*'
cors_rule.allowed_headers = '*'
cors_rule.max_age_in_seconds = 1800
cors_rules = Cors()
cors_rules.cors_rule.append(cors_rule)
set_storage_service_cors_properties(account_name, account_key, cors_rules)
Save your changes, activate your virtual environment and run the script:
Windows
python scripts\cors-enable.py
Linux
python scripts/cors-enable.py
To initialize the database, you will need to run a few standard Django commands, and the CodaLab database initialization script.
migrate
option is used).initialize.py: Inserts initial data into the database.
Run the following commands to initialize the database.
Windows
cd codalab
python manage.py validate
python manage.py syncdb --migrate
python scripts\initialize.py
Linux
cd codalab
python manage.py validate
python manage.py syncdb --migrate
python scripts/initialize.py
Run tests to verify that everything is working.
python manage.py test
Optional: Populate the site with some sample data.
Windows
python scripts\users.py
python scripts\competitions.py
Linux
python scripts/users.py
python scripts/competitions.py
This note will explain how to run the CodaLab Django web site and the CodaLab bundle service (cl server) side-by-side on a single machine. This setup is useful for people doing development, especially when working at the interface between the two systems.
As pre-requisite, we assume that:
You can already run the Django web site on your local machine as described on this page.
You have also forked the codalab-cli project and have gone through the steps listed in the Readme.
With those assumptions in place:
Begin by enabling the Worksheet feature in your web site. In your Django settings (local.py), add:
PREVIEW_WORKSHEETS = True
BUNDLE_SERVICE_URL = "http://localhost:2800"
# CODE_PATH points to local source code for bundles repo. Path is relative to this file.
BUNDLE_SERVICE_CODE_PATH = "..\\..\\..\\..\\codalab-cli"
if len(BUNDLE_SERVICE_CODE_PATH) > 0:
sys.path.append(join(dirname(abspath(__file__)), BUNDLE_SERVICE_CODE_PATH))
codalab.__path__ = extend_path(codalab.__path__, codalab.__name__)
These additional elements say to enable Worksheets using the bundle service running at the given URL (in the next steps we'll cover how to start the bundle service with the cl server
command). Finally, the code in apps\web\bundles.py
will need to import modules from the codalab-cli
project. Therefore, we extend the Python path by pointing to the CLI code on your machine. If you have repos codalab
and codalab-cli
checked in folders which are siblings, the relative BUNDLE_SERVICE_CODE_PATH
given above should work for your setup.
The Django web site is a client of the bundle service. For example, to get a list of worksheets, the Django web site makes a call to the list_worksheets
API exposed by the bundle service. However, to handle authorization, the bundle service must be able to make calls back to the web site, which hosts the OAuth server. As a result, the bundle service is a trusted OAuth client of the web site. To setup this trusted relationship:
a. Create a user on the web site. Typically, I call this user codalab
. Treat it as an admin user even though the CodaLab site doesn't really have admin roles today.
b. Activate your virtual environment and run the script: codalab\codalab\scripts\sample_cl_server_config.py
. The script will generate an output of the form:
Checking that confidential client exists for user codalab
Client already exists.
Add the following server block to your CLI config:
"server": {
"auth": {
"address": "http://localhost:8000",
"app_id": "5m <snip> Le",
"app_key": "_b <snip> !_",
"class": "OAuthHandler"
},
"class": "SQLiteModel",
"host": "localhost",
"port": 2800
}
Take the "server" block in the output and insert it into your CLI config file (.codalab\config.json
in your home directory). Since the values for app_id
and app_key
can be long, make sure to remove any line breaks that resulted from copying from the command prompt.
c. Run the Django web site. Make sure it uses port 8000. Note for Visual Studio users: with the latest Python Tools for Visual Studio, you can set the port number in the Debug tab of the project properties.
d. Activate your virtual environment and then run the bundle service: cl server
.
Use the following command to start the CodaLab server locally.
python manage.py runserver
Open a browser and navigate to http://127.0.0.1:8000 to preview the site.
When your next coding session comes along, remember to work in the virtual environment you created:
Windows
venv\Scripts\activate
Linux
source venv/bin/activate
Note: If you experience database errors try deleting the database file (\codalab\codalab\dev_db.*) and run syncdb again. After creating a new database be sure to run initialize.py
in the scripts
folder in order to insert initial data required by the app.
In order to test competitions and bundles locally, you'll need to run the compute worker roles. There are two worker.py
scripts that you will need to run.
Start the first compute worker as shown here:
cd codalab
python worker.py
Open a second command prompt and activate your CodaLab virtual environment.
Start the second compute worker as shown here:
cd codalabtools\compute
python worker.py
If you plan to test competitions locally, open a third command prompt and activate the virtual environment for the CodaLab CLI, then start the bundle server:
cl server