Page History

...

1. Click the Samples caNanoLab menu option. On the Manage Samples page, click the Create a New Sample link. This opens the Create Sample form.

2. The following table lists and describes the fields on the Create Sample page. Select or enter the appropriate information. Asterisks indicate required fields.

   Name	Definition
   Sample Name*	Enter a sample name of your choice (required).
   Point of Contact*	The Point of Contact Add button is not available unless you entered a Sample Name (required). To add a point of contact, click Add. The Point of Contact Information dialog box opens. Select an Organization Name from the drop-down or select Other and add one. Select a Role in the same manner. Fill in the address, name, phone number, and email. Click Cancel or click Save to return and the POC is added. To edit a point of contact, click Edit next to the POC, update the information, and click Save.

   To clear the entries and start again, click Reset.

3. Click Save.

   Tip
   title My Workspace
   The sample is listed on the My Workspace page where you can manage all of your submitted sample, and view any samples that a user has shared with you.

4. Once you save the sample, the Update Sample page opens. With the appropriate security permissions you can

   1. Update the sample information.

   2. Share a sample and make it public

   3. Generate a data availability metrics for the sample.

   4. Annotate the sample from the Navigation Tree.

...

The Update Sample page enables you to update sample information, update access to the sample, and generate data availability access.

The following table lists and describes each field. Asterisks indicate a required information. Fill in the following information as needed.

Click Update at the bottom of the page when you are done. To disregard the changes, click Reset.

Return to top of page

Anchor
SharingSample SharingSample

Sharing a Sample with a User or Group

...

To review a data availability metrics for an individual sample

1. Perform a sample search.

2. From the sample search results, if data availability is generated for a sample, click the link in the Data Availability column.

   

   You can review the entire metrics, and click Close when you are done.

...

1. Perform a sample search.
2. From the sample search results, click Edit in the Actions column.
3. Update Sample opens and the Data Availability Metrics section is at the bottom.
   
   
   1. If there is no metrics generated for the sample, click Generate.
   2. If a metrics was previously generated, click Edit as shown in the screen above.
   The metrics table displays high-level medidata for minimal care.
   

4. Using examples, the following table describes the percentages at the top of the metrics.

   Percentages at the Top of the Metrics	Description
   caNanoLab Availability Score: 23.0% (7 out of 30)	Indicates that the sample has 23% of the total possible number of caNanoLab attributes filled in or 7 out of 30.
   MINChar Availability Score: 11.0% (1 out of 9)	Indicates that the sample has 11% ofthe total possible number of MinChar attributes filled in or 1 out of 9.

5. The following table describes each column on the metrics.

   Columns in the Metrics	Description
   caNanoLab	Lists all data elements that can be added to the sample in caNanoLab.
   MinChar	Lists the minimum nanoparticle characterization standards as established by MinChar Initiatives.
   [Name of sample]	includes check marks where data element annotations are added to the sample.

6. The following buttons are at the bottom of the metrics.
   
   
   1. Click Delete to delete the metrics for this sample.
   2. Click Close to return to Update Sample without changing the metrics.

   3. Click Regenerate to regenerate the metrics.

...

To launch a basic search for a sample

1. There are three ways to access the basic sample search: From the home page Browse caNanoLab panel, or if you are logged in, click the Workflow menu option and Search Samples icon, or just click the Samples menu optionClick the Samples menu.
   The Manage Samples page displays.

2. Click Search Existing Samples.

   Include Page
   Search Criteria Blank include Search Criteria Blank include

   The Sample Search page displays.

3. Fill in the following search criteria as needed. 

   Sample Search Options	Description
   Keywords	Enter one or more keywords by which samples could be identified in this search. caNanoLab can search for characterization or publication keywords, as well as text describing characterizations.
   Sample Name	Enter text for the name of a sample. Select Contains (for search using partial text) or Equals (for exact text search).
   Sample Point of Contact	Enter text for the name or organization point of contact. Select Contains (for search using partial text) or Equals (for exact text search).
   Composition	Nanomaterial Entity Select from the scroll list the nanoparticle category to which the nanomaterial entity targeted by the search belongs. Example: Dendrimer Functionalizing Entity Select from the scroll list the functionalizing category to which the sample targeted by the search belongs.* Monomer Polymer Quantum Dot Antibody Biopolymer Small Molecule Function Select from the drop-down list the function type category which best fits the sample targeted by the search: Imaging Function [Other]  Include Page Other options Other options Targeting Function Therapeutic Function Transfection *You may see terms in caNanoLab that are not defined in the help glossary. These have been added by curators as [other]; they may be reviewed and defined at a later time.
   Characterization Type/Characterization	Click the drop-down list on the left and select the characterization type that applies to the sample to be searched: Physico-Chemical, In Vitro or In Vivo. Your selection determines the sub-categories that display in the Characterization field to the right. Select one or more of the items in the Characterization list.* (CTRL + click to select more than one.) Physico-Chemical Characterizations: Molecular Weight Physical State Purity Relaxivity Shape Size Solubility Surface In Vitro Characterizations: Blood Contact Cytotoxicity Enzyme Induction Immune Cell Function Oxidative Stress Sterility  Targeting Transfection In Vivo Characterizations: Pharmacokinetics Toxicology *You may see terms in caNanoLab that are not defined in the help glossary. These have been added by curators as [other]; they may be reviewed and defined at a later time.

4. Click Search.

   For information about the search results, see Sample Search Results.

...

To launch an advanced search

1. Click the Samples menu option.
   The Manage Samples page displays.

2. Click Advanced Sample Search.

   Include Page
   Search Criteria Blank include Search Criteria Blank include

   The Sample Search page displays.

3. Fill in the search criteria as needed.

   Advanced Search Category	Description
   Sample Criteria	Select an option in the first drop-down list. Select from the second drop-down, Contains (for search using partial text) or Equals (for exact text search). Enter complete or partial text in the text box.
   Composition Criteria	Select an option in the first drop-down list. Your selection drives the options that display in the second drop-down, as well as the options or text box that displays for the rest of the category. Select from the second drop-down, Contains (for partial text search) or Equals (for exact text search). Select your options or enter appropriate text in the text box. The Chemical name is optional. Available terms are defined in the caNanoLab Glossary.
   Characterization Criteria	Select a Characterization Type in the first drop-down list. Your selection drives the options that display in the second drop-down as well as the options or text boxes that displays for the rest of the category. The last text box is either a boolean value or number value, depending on the third drop-down list. An optional drop-down box for units displays only if the data has a unit. Select your options or enter appropriate text in the text box(es). Available terms are defined in the caNanoLab Glossary.

4. Click Add to each set of criteria you define. As you add criteria, they display in a table above the criteria fields on the page.
5. Select the And or Or operand at the bottom of each set of criteria when you enter more than one criteria in a set. And or Or determines whether, for the set, the search finds samples that meet all of the criteria or that meet any one of the criteria.
6. Select the And or Or operand at the bottom of the page that determines whether the search finds samples that meet only all of the criteria or that meet any one of the criteria.
7. Click Search.
   

   For information about the search results, see Sample Search Results.

...

To copy an existing sample

1. Click the Samples menu.
   On the The Manage Samples page displays.
2. Click , click Copy an Existing Sample.
   On the Copy Sample page, both fields are required.
3. In Existing Sample, fill in a complete or partial sample to search for and click the Search icon ( ).
4. Select a sample from the returned list to be copied.
5. Fill in the New Sample Name.
6. Click Submit.
   A filled in Update Sample page appears with the new sample name.
7. Edit the copied sample as needed.

...