 |
Page History
release=2.4.0
entrydate=April 20, 2011 |
topic=Installation and Upgrade |
Qtext=Can caArray and caIntegrator2 share the same version of UPT application? |
| Scrollbar | ||
|---|---|---|
|
| Page info | ||||
|---|---|---|---|---|
|
...
| Panel | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| |||||||||
|
Topic: caArray Installation and Upgrade
Release: caArray 2.4.0
Date entered: April 20, 2011
Question
Answer
Have a comment?
Please leave your comment in the caArray End User Forum.
| Scrollbar | ||
|---|---|---|
|
Atext= |
Can caArray and caIntegrator2 share the same version of UPT application?
We had previously installed caArray - v2.2.1, and UPT - v3.2.0. Recently, we added caIntegrator2 - v1.0 on Redhat 5. They are all on one machine using the same mysql instance. However, we couldn't provision additional caIntegrator2 users.
Answer
Both caArray, caIntegrator2 are using UPT /and CSM as their provision tools. Since the applications were developed independently, they might be requiring a different versions of UPT and CSM. In order to share the same UPT application, it is important to have the UPT installation to be the highest version required by the applications. UPT is backward compatible to the previous version used by the other applications. }}
Comparison of UPT requirement
Table The table below compares the available versions of each application, and their corresponding UPT version used. If the caArray and caIntegrators caIntegrator applications are installed on the same server, the highest version of UPT /and CSM should be installed.
...
...
UPT Compatibility
...
...
Application | CSM Version | UPT Version | UPT Upgradable? |
|---|---|---|---|
caArray 2.2.X | CSM 4.0 | UPT 3.2 | Yes |
caArray 2.3.X | CSM 4.0 | UPT 3.2 | Yes |
caIntegrator2 1.0 | CSM 4.2 | UPT 4.2 | N/A |
Find the highest UPT version
The pictures below illustrates illustrate the UPT version requirement by caArray and caIntegrator2. The pictures are the courtesy of Vijay Parmar of the UPT/CSM Team.
Upgrade UPT without upgrading caArray
Upgrading an existing UPT 3.2 to UPT 4.2 can be done via the automated UPT installer (GUI or command line). The UPT installers can be downloaded at NCI's gforge site: You can download the UPT installers.
The UPT installation and deployment section in the CSM Guide outlines the steps to successfully upgrade an existing UPT 3.2 to UPT 4.2.
After UPT is upgraded from 3.2 to 4.2, it is also necessary to change the caArray 's Install.Properties file to reflect the new CSM version:
Previous CSM version:
...
Application CSM Version=3.2
Change to:
...
Application CSM Version=4.2
For detailed information on how to configure caArray, read Post Installation Task.Tasks.
Have a comment?
Please leave your comment in the caArray End User Forum.
| Scrollbar | ||
|---|---|---|
|
