 |
Page History
...
Ideally, caIntegrator should be run on a dedicated server, with the heap size set as close as possible to the amount of available physical memory without destabilizing the underlying operating system.
The table below shows data from extensive testing of caIntegrator study deployments on different hardware configurations with varying amounts of heap space.
REFERENCE INFORMATION: |
|
| |
|
|
|
|
* Trials #1 and #2 were performed on a Dell Optiplex 755 workstation running Windows XP Professional |
| ||
* The workstation runs on an Intel Core2 Quad Q6600 processor at 2.40 Ghz |
| ||
* The total installed physical memory is 3.25 GB, with approximately 1.75 GB available at the time of testing before launching caIntegrator | |||
|
|
|
|
Trial #1 |
|
|
|
|
|
|
|
* The heap space setting as specified in run.bat is -Xms256m -Xmx512m |
| ||
|
|
|
|
|
|
|
|
# of samples mapped | Total size of samples (MB, uncompressed) | Deployment Status | Time to deploy or fail (minutes:seconds) |
1 | 2 | SUCCESS | 1:00 |
2 | 4 | SUCCESS | 0:47 |
4 | 7.8 | SUCCESS | 1:15 |
8 | 15.5 | SUCCESS | 1:50 |
16 | 31.2 | SUCCESS | 3:15 |
64 | 124.8 | SUCCESS | 13:55 |
128 | 249.6 | FAIL | 21:16 |
192 | 374.4 | FAIL | 23:47 |
224 | 436.8 | FAIL | 25:44 |
256 | 499.2 | FAIL | 1h 5:02 |
|
|
|
|
Trial #2 |
|
|
|
|
|
|
|
* The heap space setting as specified in run.bat is -Xms256m -Xmx1024m |
| ||
|
|
|
|
|
|
|
|
# of samples mapped | Total size of samples (MB, uncompressed) | Deployment Status | Time to deploy or fail (minutes:seconds) |
1 | 2 | SUCCESS | 0:10 |
4 | 7.8 | SUCCESS | 0:21 |
16 | 31.2 | SUCCESS | 1:08 |
64 | 124.8 | SUCCESS | 5:12 |
128 | 249.6 | SUCCESS | 12:48 |
192 | 374.4 | SUCCESS | 21:35 |
224 | 436.8 | FAIL | 27:59 |
256 | 499.2 | FAIL | 34:08 |
|
|
|
|
* Trial #3 was performed on a Dell Poweredge server running Linux |
| ||
* The server runs on a quad-core 2.33 Ghz Intel(R) Xeon(R) 5148 CPU |
| ||
* The total installed physical memory is 16 GB |
|
| |
|
|
|
|
Trial #3 |
|
|
|
|
|
|
|
* The heap space setting as specified in run.bat is -Xms2048m -Xmx2048m |
| ||
|
|
|
|
|
|
|
|
# of samples mapped | Total size of samples (MB, uncompressed) | Deployment Status | Time to deploy or fail (minutes:seconds) |
192 | 374.4 | SUCCESS | 18:12 |
208 | 405.6 | SUCCESS | 41:16 |
224 | 436.8 | SUCCESS | 27:21 |
256 | 499.2 | SUCCESS | 33:13 |
512 | 998.4 | FAIL | 4h 47:23 |
Have a comment?
Please leave your comment in the caIntegrator End User Forum.
...
