Introduction
This section provides requirements, instructions, and troubleshooting information for installing the LexEVS Distributed environment.
Preliminary considerations
- The LexEVS 6.0 Supported Platforms to Include are the same for this environment as they are for the Local Runtime.
- Before installing the LexEVS Distributed environment you must have a WIP GET Installing LexEVS 6.0 Local Runtime installed and working.
- It is not required that you load a terminology into the Local Runtime in order to complete the installation of the Distributed environment. However, using the APIs in the Distributed environment requires that a terminology be loaded into the Local Runtime.
- The Distributed environment has additional LexEVS 6.0 Prerequisite Software Supported to Include beyond the Local Runtime. The additional web application server does not have install steps given in this guide. The web application server can be on the same server or a different server from the Local Runtime.
- Complete the #Downloading and Installing LexEVS Distributed steps below.
Once you have completed the additional prerequisite software install, the Distributed environment install steps, and the verification test as described in this guide then you should be ready to start using the Distributed features to meet the needs of your application. Not counting prerequisite software products the installation and verification should not take more than 30 minutes.
Downloading and installing LexEVS Distributed
Step |
Action |
|---|---|
1. Download the latest version of the LexEVS Distributed WAR file from the right. You have a choice between WAR files tailored for JBoss or Apache Tomcat installations. The location you have chosen to save this on your computer will be referred to as the Note Access to the downloads does not require an account. If you are having trouble downloading files then you may need to disable pop-up blockers or check any firewall settings at your site. |
Unable to render {include} The included page could not be found. |
2. Shut down your application or servlet container. This presumes that you have already installed a web server as outlined in the LexEVS 6.0 Prerequisite Software Supported to Include. The command to do the shut down will be web server specific. See the documentation for your web server for information on how to do this. There may be many alternatives.
|
|
