NIH | National Cancer Institute | NCI Wiki  

Error rendering macro 'rw-search'

null

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 41 Next »

Some of the features in caDSR II allow you to process content from a CSV file for bulk/batch importing to create new content. To view or use these features, log in as described in Logging In. These features need specially formatted templates. 

Contents of This Page

Conventions

Common usage details for the templates are that due to inclusion of the following Data Validations please follow these conventions: 


  • Basics
    • When the provided Template has .xls or .xlsx file extension, always start with a fresh Template for each import
      • This insures that the Data Validation and Formulas that are embedded in the template for drop-downs and auto-populate are correct for each Import and rows/valid choices have not been inadvertently deleted.
    • Save-As the completed Template as .cvs before importing
      • NOTE: This is a common step to forget and if you try to import a .xsl or .xslx file it will cause an immediate exception "error" when clicking "Import", so check the file extension if you have a problem
    • While editing the Template do not delete entire Rows or Columns
      • This is due to the Data Validation, if you delete rows some of the valid choices will be deleted
      • If you delete an entry in a cell that was auto-populated, you may lose the formula. These formulas are not essential for importing, but are helpful to avoid typos or other errors
      • You can use the Delete Key to clear the contents of individuals cell or cells but do not delete entire rows or columns
  • Templates contain Data Validation for several columns that are found on several of the templates end users avoid errors and streamline completing the spreadsheets. 
    • All templates - Context
        • Drop down of all valid Contexts
    • Templates with Macros
      • CDE Match: "Opt"+"CMD"+"t" to transform content into the correct format for CDE Match. After filling in your column headings and permissible values, the macro will take each column heading and permissible values and create a new "Transform" sheet containing one row per heading/unique permissible value combination. For example, if the column has 5 permissible values, there will be 5 rows in the transformed sheet. Please remember to save as cvs before running CDE Match.
      • Form Import: "Shift" + "CMD" + "t" to transform content into the correct format for importing. If you are using a REDCap data dictionary csv file, cut and paste your content into the template starting on Row 3, Column E "Variable / Field Name".

        • The macro will:
          • Add 4 columns to the worksheet. (Leave "DO NOT USE" empty, enter your "Batch User Name", a "Batch Name" on each Row. The combination of "Batch User Name" AND "Batch Name" must be unique for each imported template.)
          • Generate a unique "Seq ID" for each row
          • Copy "Form Name" into Column G, Section Header for each row since this is a required field in caDSR.  
DO NOT USEBatch UserBatch NameSeq ID


    • Import DEC and Import VD
        • Drop Down of the Standard Conceptual Domain Names, the CD ID will automatically populate
    • Import Value Domain
      • Drop Downs for Context, Format, UoM, Datatype, and Type (Enumerated/NonEnumerated)
    • Import Designations - this is used to import the "USED_BY" designation as well as all AI types for Data Elements, Data Element Concepts, Value Meanings and Value Domains
      • Drop Downs for AI type, Alternate Name, Alternate Name Type, Alternate Name Context
      • For Alternate Name, when the Alternate Name Type is "USED_BY" the Alternate Name must be the same as the Alternate Name Context
    • Import PV/VM 
      • Drop Down for VM String Type
      • Drop Down for optional VM Alternate Name Type
    • VM Match
      • No drop downs.


The Batch Owner and Batch User columns can be any text that you provide. The system does not validate these columns. 

Templates

The following table lists the latest templates.

Tips

Tips for All Imports

Use Data ValidationAlways start with a fresh Template with Data Validation to help avoid uncaught errors due to invalid manually entered data. We have added a lot more error handling in this release, but it's not perfect yet, in particular when invalid or retired concepts are used.
Required Columns

All templates require a BATCH USER, BATCH NAME, and SEQ ID on each row.

Delete/Purge

When reimporting, it is safest to select all the rows and "Delete", then select "Purge", then select all rows and “Purge Records".

For Forms, select "Delete Hierarchies", then select "Purge", then select the rows and "Purge Hierarchies".

Unique Column NamesYou may add additional columns to the template for taking/keeping notes after the last template column, but the column names must be unique.
Invalid or Retired ConceptsInvalid VM Concepts on import are not saved in the system and can create a GAP in the concept drop down. If the invalid or missing concepts are found, the system will display and error. Curators should fix all Concept Errors reported on Import BEFORE Validating.
Concept FormattingConcept String should not contain commas, tabs, or or other hidden characters. Always "Paste Values" in order to avoid issues.
CSV Files!!Template must be saved as CSV for importing. Other file types will cause an error.
Seq ID RulesSeq ID must be a unique integer.
Import ExceptionsMissing Batch User, Batch Name, or Seq ID will cause Exception.
Selecting the "Import" Command

For imports and matching, select the type of import/match item from the "Favorites" list, then select the "Import" command. For most imports there will be a dropdown with either one or two of the following choices: "Conceptual Object Import" and "Data Object Import".  For most imports choose the first choice in the list.

For VM Match both choices are presented, choose the second one, "Data Object Import".

Exception on SEQ/Row NumberMultiple missing required fields may not report the correct row number in the Exception Message. Inspect the template for empty cells.
Save / RevalidateIf making changes through front-end, Save and Revalidate. This will refresh the messages.

Tips for CDE Imports

Duplicates in FileDuplicate rows within the imported file are not caught on Import, but duplicate CDEs will not be created.

Tips for CDE Match

Run Transform

CDE Match transforms the Source input into one row per column and permissible value. The command to transform the Source input details is "opt"+"cmd"+"t".

See InstructionsPlease see the CDE Match Instructions document attached to this page. 
Special FeaturesCDE Match has a command "Run DEC Match". This will run the match algorithm on the imported files using just the CDE names, ignoring the permissible values. Click the "Matched DEC" node to see results.

Tips for DEC Imports

Validating Lots of RowsSometimes, the system throws an error when attempting to validate more than 4 rows at a time. If that happens, try validating a few rows at a time.

Tips for DEC Match

DescriptionDEC match will run matching algorithms on the names in the template and display results in the "Matched DEC" node. You can select one of the DECs as "Preferred" and then download the results using the Delivery Options feature. 
Context Column

In the Context column, you can enter one or more contexts to search for matching DECs. Separate each DEC with a comma. Do not use spaces between DECs. For example:

XXX,CTEP,CCR

Tips for VD Imports

None at this time.

Tips for PV VM Imports

Import into Existing VDThe PV VM import is designed to import an enumeration into an existing Value Domain. PV/VMs can be created using existing VMs, or you can specify a new VM either with or without concept codes.
Specified VM DefinitionOptional Specified VM Definition is only used if the VM Type is "TEXT". The system will not throw an error but it won't be added to the VM.
Possible TimeoutValidate/Create will timeout if more than 5 minutes. Try batches of 100 until we can redesign the code. Watch.
VM ReuseIn a Text VM is specified and an existing VM with the exact name is found, it will be reused, even if it has concepts. The Validation message will indicate that existing VM is being used (need to fix spacing).

Tips for VM Match

After Importing

The results after importing are displayed one row per Value Meaning. All VM Match user results are kept in one database table, and without filtering results, they are all displayed in the same grid. So, after selecting "Go to Data Manager" enter your batch name and click "Apply Filter" to see just your results.

"User Tips" Column

The User Tips column is used by the system instead of the VM Name. Sometimes the VM Name from your form or data is not very representative of the its meaning, or consists of too many terms. If a "User Tip" is entered it is used instead of the VM Name. User Tips can be entered through the front end, or starting in Sprint 47, can be entered into the Template for each row and imported. 

Algorithm

Punctuation and spaces are removed. The "Rule Description" explains why each match was selected. The algorithm does not currently account for spelling errors.

"Run Match" Command

Select the rows to run the match algorithm against and select the "RUN MATCH" Command. Punctuation and spaces are removed. This command will try to find Exact or Like Matches using the VM preferred name for existing VMs, Concept Preferred name and Synonyms.

Click "VM Matched Results" to review recommended matches. If you do not find a desired match, select "Run VM Match Unrestricted".

"Run VM Match Unrestricted" 

Command

This match searches on the longest term in addition to more extensive matches. 

"VM Matched Results "

If there is only one exact match, the system will automatically associate the matched result with the imported VM Name.

If there are multiple matches the user can select a row from "VM Matched Results" and select the "Set Preferred" command.

Multiple Concepts can be selected one at a time to post coordinate concepts. The system will appended the concept to the preferred concept string and generate the resulting name in the order the concepts are selected.  This can be viewed by selecting the Node with the Concept Name to view the selected items. The concepts and be reordered manually, but be sure to reorder the concept names, or clear the results, "Save" and then select concepts again from the matched results. 

Advancing through the imported VMs

When on the "VM Match Header" you can advance to the next VM in your imported file by using the "Rows x of xxx" arrows.

VM Match Header.

Column Order

The main column in VM Match is the VM Name. The processing is designed to find matching concepts based on the name and insert the Concept Name and Concept Code into the table next to the VM NAME unless "User Tips" are entered. This order of the columns makes it easier to populate the PV/VM Template using cut and paste. 

Exporting results

Use the "Delivery Options" command to export the VM Match results into and Excel file. This simplifies creating the list of PV/VMs for PV/VM Import to populate and existing Value Domain.

Tips for Form Imports

Import from REDCap Data Dictionary Format

The Form Import Template is an xslm filetype and contains several Excel Macros, so please be sure to select "Enable Macros" when opening the template. This has been tested for use only on a Windows PC platform, not Mac laptops.

  1. Paste your form content into the template starting on Row 3, column E. At a minimum you must run the Macro "Standardize", see instructions below.
  2. If importing a PhenX REDCap Data Dictionary, you must run "Standardize", then "PhenxStandarize".
  3. "CombineZip" is optional, it automates copying form content into the template from one or more REDCap dictionary csv files. See instructions below. 
  4. Enter a Batch User, Batch Name and ensure that each row has a unique "Seq Id"
  5. Save the Form Template file as csv.
  6. Run Form Import from Manage>>Manage Data (or your bookmarked Favorites)
  7. Select "Import" from the toolbar, then "Conceptual Data Object" from the drop-down
  8. Select the checkbox next to "Form Import RedCAP v1" and select "Import" option from the toolbar (Between "Add New Mapping" and "Go To Data Manager")
  9. Select the "Choose File" and select the Form Import Template from our desktop that you have prepared for loading
  10. Change the last row in the table "Start at Row" from 2 → 3
  11. Select "Import" at the bottom of the Table
  12. After "Success" message, Select "Go to Data Manager" or Manage>>Manage Data>> Form Import (or from your bookmarked Favorites)
  13. Use the filter to search for your form, Click "Apply Filter"
  14. Select "Edit" for your form
  15. Select a "Context" from the dropdown
  16. Save
  17. Select "Parse Form"
  18. If successful, select "Validate Form"
  19. Review the results
  20. After successful Validate, Select "Create Form"
  21. Copy the Public Id and choose "Forms" from Manage>>Manage Data (or your bookmarked Favorites) to view the newly created form in caDSR
Running the Macros

There are 3 macros in the Excel Template. The Macro run key sequence can be viewed by selecting "Tools" from the Excel menu bar, then "Macro". 

Macro NameDescriptionExecute macro
CombineZipThis macro allows the user to import one or more forms in REDCap Data Dictionary format into the Form Template from a desktop folder.  This allows the user to run Form Import on a file containing multiple forms instead of one form import at a time. After choosing the keys as indicated in Execute Macro, select a Folder from your desktop and select the forms that you want to combine and import into the spreadsheet. Then run the "Standardize" macro, instructions below.Choose "Option" + "Command" + "w"
StandardizeEach row must have a Section Header and a few other details. This macro transforms content from REDCap structure into the structure suitable for caDSR Form Import.Choose "Control" + "Shift" + "x"
PhenxStandardizeFiles sent to us by PhenX team contained a row with Question Text "Record ID", and the Protocol ID was inserted into the Field Note Column. This macro removes the extra row for "Record ID", and clears the "Field Note" columnChoose "Control" + "Shift" + "t"
Filling the template with form dataThe 1st row of headings are the REDCap DD headings. The 2nd row of headings match caDSR headings. Enter a short name in the Variable / Field Name, this can be used for matching to an existing CDE. Paste content into the template starting in the 3rd row. Please see the template for the mappings between the REDCap Data Dictionary column names and the caDSR form column names.
Form ContextREDCap does not have a column for Context. Context for all the forms in the templates is selected after importing the template into caDSR.

Tips for Designation Imports

Consistency CheckingIf AI Long Name does not match the specified AI Public ID Long Name, the system will show an error. We are requesting AI Long Name and AI Type to ensure Alt names are not inadvertently added to the wrong AI. Public IDs are very similar, typos are easy to make. If this becomes onerous, we could add a Validate Step to display the AI Long Name and AI Type for curator to see and visually verify before selecting Create.

  • No labels